 |
 |
 |
|
 |
|
 |
 |
|
 |
|
 |
|
 |
|
|
|||||||
|
|
||||||||
|
Click Any Photo for a Larger One
 |
The Heater doesn't work, here's one reason why:
The Heater Control cable is not attached |
 |
Here is another reason the Heater doesn't work, the tube from inside the car just goes out behind the seat into the engine compartment and is not connected to the Heat Exchanger.
This is a good way to heat your car with Exhaust Fumes! |
 |
Yep- the Square to Round Tube that is supposed to connect the Cooling Shroud to the Heater tubing is missing. Where could it be?
Note that the choke cable is still missing (upper right) |
 |
How does the Shift pattern work? Since there is no Shift Pattern Decal to show that it is a "Reverse H" pattern, how would you know?
Pay no attention to those 2 silver levers for the Choke and Heater, they aren't hooked up. Oh, and that Parking Brake doesn't work either. |
 |
How do you Restore a Car when the Battery Box is rusted out in the Floor? Weld in a new one?
Nyahh....just make a box and jam it in and put in some sheet metal screws. Who looks under the car? |
 |
Ewww! What's this?
Why...it is the Adjustment Plate for the ChainCase, but you can't really tell because of the 40 years of oil and dirt on it. The Red Arrow is pointing to where the Speedometer cable is supposed to go. I guess that is missing too. |